CVC SERIES BOILER FEED SYSTEM
Your email :
Sold to:
or
Quoted to: 		Ship to:
Date:
Requested Delivery Date:
FOX Quote No.:
Picklist Order No.:
Salesman's No.:
Customer Order No.:
Ship Via / FOB:
PPD
COL
CHRG
Federal Taxes
  % 		Prov./State Taxes
  %
PROJECT:

Identification\Tag:  
BILL OF MATERIALS:
CONDENSATE RETURN UNITS SERIES CVC AND/OR
BOILER FEED UNITS SERIES BFC & BFCE
1) Pump(s)
A single-stage coupled cast iron, bronze fitted casing, leak proof mechanical shaft seal, stainless steel large diameter corrosion resistant shaft, and bronze casing wearing. These pump(s) requirement allows handling of 2500F condensate without flashing and cavitation. The pump(s) is provided with an axial flow impeller being enclosed in a cast bronze construction. The pump(s) cast iron flanged volute has an internal cast iron baffle preventing pre-rotation of the condensate. The entire rotating assembly can be removed without distributing the discharge or return piping.
                                                                             Pump(s) Selection




              Each Pump Capacity: USGPM at   PSI   feet
1)
2)
2) Motor(s)
Open-drip proof motor, standard NEMA construction. Motor bearings are sealed and factory greased for extra-long trouble free operation. Single phase fractional Hp with dual voltage motors include built-in thermal overload protection. Motors are standard at 3450 RPM.
                                                                                    Motor(s) Selection
Motor(s) Hp
Cycle : Hz
Voltage :
Phase:

3) Receiver
Receiver inlet, pump(s), vent and drain connections.

                                      Receiver Selection          Condensate (CVC)  Boiler feed (BFC or BFCE)
Capacity   gallons Type: Selection : Selection :
Shape:   Construction:

              Size:  "

  Size:   gallons
4) Receiver accessories:
Float switch(es) and alternator connections for complete flexibility
                                                                              Accessories Selection
Thermometer:   40 0 F to 300 0 F
Gauge Glass Assembly
Additional receiver tappings  "

5) Mechanical Controls:
For CVC Units:
Automatic operation is provided by an internal mounted enclosed adjustable float switch assembly, for simplex (S-CVC) or two float switches or control panel with electrical alternator for duplex (D-CVC) operation.
The alternator shall: Change the operating sequence automatically after each cycle.
                                                 Provide simultaneous operation under peak load conditions.
                                                Operate the second pump automatically, should the active pump or its control fail.

                                                                                      Selection
For Simplex Units:
For Duplex Units:
Control Panel w/Electrical Alternator
NEMA   Panel
Isolation valve(s) (optional) if required "
Discharge pressure gauge(s) with mini ball valve(s) (optional)
Inlet strainer for tank return connection (loose) "
Inlet basket strainer (cast iron receiver) "
For BFC or BFCE Units:
Automatic operation is provided by an internal mounted enclosed adjustable float switch operated by an internal make-up valve for boiler feed units.
                                                                                     Selection
For Simplex Units:
For Duplex Units:
or Control Panel W/Electrical Alternator
NEMA   Panel
Isolation valve(s) (optional) if required "
Discharge pressure gauge(s) with mini ball valve(s) (optional)
Pressure gauge(s):
Inlet strainer for tank return connection (loose) "
Inlet Y strainer "
Inlet basket strainer "
Float operated internal Make-up valve 
Gauge glass and shut-off valves
OPTIONAL MOFIFICATIONS AVAILABLE FOR CONDENSATE (CVC)
AND BOILER FEED (BFC OR BFCE) UNITS
                                                                Mechanical Modifications
                                                                   Electrical Modification

Duplex control panels, combination starters with various forms of disconnects or circuit breakers, water resistant or explosion proof enclosures, hand-off auto switches, pilot lights and transformers providing low control voltage. All arrangements are CSA and/or UL approved. Transfer switches to alternate pump operation
or transfer pump-boiler relationship in multiple boiler installations.
See table

OPTIONAL FACTORY FEATURES:
Testing:
Painting:
Crating:
SPECIAL INSTRUCTIONS:
CONTROL PANEL:   (See EP section in FLO FAB catalogue for more details)
Model:  
Option Code CONTROL OPTIONS
Description
CONTROL ENCLOSURES
4.2 AMPS 1 HP 208-220-230-240V 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
4.2 AMPS 1 HP 208-220-230-240V 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
6.8 AMPS 2 HP 208-220-230-240v 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
6.8 AMPS 2HP 208-220-230-240v 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
9.6 AMPS 3 HP 208-220-230-240v 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
9.6 AMPS 3 HP 208-220-230-240v 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
15.2 AMPS 5 HP 208-220-230-240v 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
15.2 AMPS 5 HP 208-220-230-240v 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
22 AMPS 7.5 HP 208-220-230-240v 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
22 AMPS 7.5 HP 208-220-230-240v 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
28 AMPS 10 HP 208-220-230-240v 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
28 AMPS 10 HP 208-220-230-240v 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
42 AMPS 15 HP 208-220-230-240v 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
42 AMPS 15 HP 208-220-230-240v 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
54 AMPS 20 HP 208-220-230-240v 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
54 AMPS 20 HP 208-220-230-240v 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
68 AMPS 25 HP 208-220-230-240v 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
68 AMPS 25 HP 208-220-230-240v 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
80 AMPS 30 HP 208-220-230-240v 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
80 AMPS 30 HP 208-220-230-240v 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
104 AMPS 40 HP 208-220-230-240v 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
104 AMPS 40 HP 208-220-230-240v 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
130 AMPS 50 HP 208-220-230-240v 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
130 AMPS 50 HP 208-220-230-240v 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
154 AMPS 60 HP 208-220-230-240v 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
154 AMPS 60 HP 208-220-230-240v 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
192 AMPS 75 HP 208-220-230-240v 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
192 AMPS 75 HP 208-220-230-240v 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
248 AMPS 100 HP 208-220-230-240v 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
248 AMPS 100 HP 208-220-230-240v 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
312 AMPS 125 HP 208-220-230-240v 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
312 AMPS 125 HP 208-220-230-240v 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
360 AMPS 150 HP 208-220-230-240v 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
360 AMPS 150 HP 208-220-230-240v 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
2.1 AMPS 1 HP 460-480V 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
2.1 AMPS 1 HP 460-480V 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
3.4 AMPS 2 HP 460-480V 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
3.4 AMPS 2 HP 460-480V 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
4.8 AMPS 3 HP 460-480V 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
4.8 AMPS 3 HP 460-480V 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
7.6 AMPS 5 HP 460-480V 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
7.6 AMPS 5 HP 460-480V 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
11AMPS 7.5 HP 460-480V 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
11 AMPS 7.5 HP 460-480V 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
14 AMPS 10 HP 460-480V 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
14 AMPS 10 HP 460-480V 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
21 AMPS 15 HP 460-480V 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
21 AMPS 15 HP 460-480V 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
27 AMPS 20 HP 460-480V 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
27 AMPS 20 HP 460-480V 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
34 AMPS 25 HP 460-480V 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
34 AMPS 25 HP 460-480V 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
40 AMPS 30 HP 460-480v 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
40 AMPS 30 HP 460-480V 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
52 AMPS 40 HP 460-480V 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
50 AMPS 40 HP 460-480V 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
65 AMPS 50 HP 460-480V 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
65 AMPS 50 HP 460-480V 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
77 AMPS 60 HP 460-480V 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
77 AMPS 60 HP 460-480V 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
96 AMPS 75 HP 460-480V 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
96 AMPS 75 HP 460-480V 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
125 AMPS 100 HP 460-480V 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
124 AMPS 100 HP 460-480V 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
156 AMPS 125 HP 460-480V 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
156 AMPS 125 HP 460-480V 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
180 AMPS 150 HP 460-480V 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
180 AMPS 150 HP 460-480V 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
240 AMPS 200 HP 460-480V 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
240 AMPS 200 HP 460-480V 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
302 AMPS 250 HP 460-480V 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
302 AMPS 250 HP 460-480V 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
361 AMPS 300 HP 460-480V 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
361 AMPS 300 HP 460-480V 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
414 AMPS 350 HP 460-480V 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
414 AMPS 350 HP 460-480V 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
477 AMPS 400 HP 460-480V 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
477 AMPS 400 HP 460-480V 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
590 AMPS 500 HP 460-480V 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
590 AMPS 500 HP 460-480V 3 phase SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
2.7 AMPS 2 HP 600V SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
2.7 AMPS 2 HP 600V SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
3.9 AMPS 3 HP 600V SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
3.9 AMPS 3 HP 600V SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
6.1 amps 5 hp 600v SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
6.1 AMPS 5 HP 600V SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
9 AMPS 7.5 HP 600V SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
9 AMPS 7.5 HP 600V SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
11 AMPS 10 HP 600V SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
11 AMPS 10 HP 600V SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
17 AMPS 15 HP 600V SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
17 AMPS 15 HP 600V SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
22 AMPS 20 HP 600V SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
22 AMPS 20 HP 600V SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
27 AMPS 25 HP 600V SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
27 AMPS 25 HP 600V SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
32 AMPS 30 HP 600V SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
32 AMPS 30 HP 600V SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
41 AMPS 40 HP 600V SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
41 AMPS 40 HP 600V SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
50 AMPS 50 HP 600V SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
52 AMPS 50 HP 600V SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
62 AMPS 60 HP 600V SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
62 AMPS 60 HP 600V SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
77 AMPS 75 HP 600V SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
77 AMPS 75 HP 600V SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
99 AMPS 100 HP 600V SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
99 AMPS 100 HP 600V SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
125 AMPS 125 HP 600V SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
125 AMPS 125 HP 600V SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
144 AMPS 150 HP 600V SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
144 AMPS 150 HP 600V SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
192 AMPS 200 HP 600V SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
192 AMPS 200 HP 600V SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
1.7 AMPS 1 HP 600V SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
1.7 AMPS 1 HP 600V SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
242 AMPS 250 HP 600V SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
242 AMPS 250 HP 600V SERVICE CONDITIONS -AMBIENT SERVICE TEMPERATURE: NEMA 1 (IP20): -10C TO 40C (14F TO 104F) -AMBIENT STORAGE TEMPERATURE: -20C TO 70C (-4F TO 158F) -HUMIDITY: 0% TO 95%, NON-CONDENSING -ALTITUDE: TO 1000 METERS (3300FEET); HIGHER BY DERATING -VIBRATION: 0.33MM (10 TO 20 HZ), 0.22G (20 TO 55HZ) STANDARDS AND RELIABILITY -UL 508A (INDUSTRIEAL CONTROL PANELS) -UL, CUL LISTED
ANALOG OUTPUT(11BIT+SIGN) PROVIDES 2 SIGNALS FOR REMOTE METERING OF ANY TWO OF THE DRIVE'S "U1" PARAMETERS. THESE ARE IN ADDITION TO THE TWO STANDARD ANALOG OUTPUTS. SIGNAL LEVEL (INDIVIDUALLY SELECTABLE): 0 TO +/- 10VDC (20KOHM) -MOUNTS AT OPTION CONNECTOR CN5-A, CN5-B, OR CN5-C
DIGITAL OUTPUT (8 CHANNEL) PROVIDES 8 ADDITIONAL DIGITAL OUTPUTS FOR USE IN MONITORING THE STATUS OUTPUTS OF THE DRIVE. SIGNAL LEVEL: 2 CHANNELS, FORM A, 250VAC, 30VDC, 1A 6 CHANNELS, PHC, 48VDC, 50MA, SHARED COMMON MOUNTS AT OPTION CONNECTOR CN5-A, CN5-B, OR CN5-C
LCD KEYPAD INSTALLATION SET A (REMOTE OPERATOR MOUNTING BRACKET KIT) BRACKET TO WICH THE LCD DIGITAL REMOTE OPERATOR (JVOP-183) ATTACHES, AND HAS 4 THREADED HOLES AND SCREWS TO ATTACH TO THE COVER OF AN ENCLOSURE. THE KIT CONTAINS 2 SCREWS TO MOUNT THE KEYPAD TO THE BRACKET AND 4 NUTS TO ATTACH THE BRACKET TO THE CUSTOMER SUPPLIED SCREWS ATTACHED TO THE ENCLOSURE.
LCD KEYPAD INSTALLATION SET B (REMOTE OPERATOR MOUNTING BRACKET KIT) CONTAINS SIMILAR BRACKET THAT THE KEYPAD ATTACHED TO AND HAS NON-THREADED HOLES FOR MOUNTING TO AN ENCOLSURE THAT HAS THE SCREWS ATTACHED TO THE ENCLOSURE ALREADY. THE KIT CONTAINS 2 SCREWS TO MOUNT THE KEYPAD TO THE BRACKET AND 4 NUTS TO ATTACH THE BRACKET TO THE CUSTOMER SUPPLIED SCREWS ATTACHED TO THE ENCOLSURE.
USB COPY UNIT (Y-STICK) ALLOWS THE DRIVE TO CONNECT TO THE USB PORT ON A PC. IT CAN READ, COPY AND VERIFY DRIVE PARAMETER SETTINGS FROM ONE DRIVE TO ANOTHER LIKE DRIVE. THE UNIT PLUGS INTO THE RJ-45 PORT ON THE FRONT OF THE DIGITAL OPERATOR. REFER TO WEBSITE WWW.YASKAWA.COM TO DOWNLOAD THE SOFTWARE.
EtherNet/IP This option complies with the EtherNet/IP protocol specification. This allows for communication over 10/100 Mbps Ethernet networks. This option has the ability to configure the IP Address from a user specified IP address, from a DHCP host, or from a BootP host. All parameters, diagnostics and operational commands are accessible via EtherNet/IP. Auto-tuning the motor is also possible through this option using the DriveWizard PC program.
Modbus TCP/IP This option complies with the Modbus TCP/IP protocol specification. This allows for Modbus communication over 10/100 Mbps Ethernet networks. This option has the ability to configure the IP Address from a user specified IP address, from a DHCP host, or from a BootP host. All parameters, diagnostics and operational commands are accessible via Modbus TCP/IP. Auto-tuning the motor is also possible through this option using the DriveWizard PC program. This option supports up to 10 simultaneous PLC/PC connections.
BACnet This option complies with the BACnet protocol specification and is BTL certified. This allows for communication over MS-TP (RS-485) BACnet networks. All parameters, diagnostics, and operational commands are accessible via BACnet. BACnet is supported and maintained by ASHRAE Standing Standard Project Committee.
PROFINET This option complies to PROFINET I/O device and PROFIDrive profile specifications. It allows connection to a PROFINET network and facilitates the exchange of data via a simple, networking solution that reduces the cost and time to wire and install factory automation devices, while providing interchangeability of like components from multiple vendors. This is a PROFINET Conformance Class A certified interface. This interface makes it possible to perform the following from a PROFINET master device: Operate the drive Monitor the operation status of the drive Change parameter settings
Metasys N2/Apogee P1 This option allows the drive to connect to either Johnson Controls Metasys N2 network or Siemens Apogee P1 network and complies to the guidelines for each protocol. This allows for communication over RS-485 connection. All parameters,diagnostics, and operational commands are accessible via Metasys N2/Apogee P1.
DeviceNet™ With ADR Each DeviceNet network supports up to 63 drives. Controllers are available from many PLC and/or PC suppliers. The DeviceNet network communications option board is designed to comply with all pertinent aspects of the ODVA (Open DeviceNet Vendor Association) specification and AC drive profile. All parameters, diagnostics, and operational commands are accessible via DeviceNet. Automatic Device Replacement (ADR) is supported in this DeviceNet option, including the functions of Auto Baud Rate sensing and Faulted Node Recovery (using Group 4 messaging). The DeviceNet satellite board mounts integrally in the drive and provides a DeviceNet standard open tap connector. Electronic Data Sheets may be downloaded from www.yaskawa.com to assist with network configuration and drive setup.
PROFIBUS DP This option complies with the Profibus- DP protocol specification. All parameters, diagnostics and operational commands are accessible via Profibus. The option board provides a 9-pin (F) type D-Sub connector for easily connecting to a standard Profibus style, shielded twisted-pair cable. Each Profibus network supports up to 99 drives. This option supports all of the Profibus data rates from 9.6 Kbps to 12 Mbps. Up to 32 bytes of input data and 32 bytes of output data are provided per message transaction. Sync and Freeze modes are supported for groups. Profibus DP-V1 support (cyclic and acyclic data exchange). Configurable PPO read and write parameters. The option is configured using parameters within the drive, which allows for easy configuration eliminating the use of hardware switches. Status LEDs are viewable through the front cover, and a monitor has been added to allow for improved diagnostics.
LonWorks Compatible with the Lon Mark Interoperability Association and complies with the Functional Profile for a Variable Frequency Motor Drive. Features the FFT-10A Free Topology Twisted-Pair Transceiver. Phoenix-style screw termination or RJ-45 connector.
OVERLAY, KEYPAD, SELF-ADHESIVE THIS MEMBRANE IS USED TO COVER THE OPERATOR CUTOUT IN THE ENCLOSURE DOOR WHICH THE KEYPAD HAS BEEN REMOTELY MOUNTED
OVERLAY, KEYPAD, SELF-ADHESIVE THIS MEMBRANE IS USED TO COVER THE OPERATOR CUTOUT IN THE ENCLOSURE DOOR WHICH THE KEYPAD HAS BEEN REMOTELY MOUNTED
DIGITAL OPERATOR, LCD (JVOP-183) STANDARD DIGITAL OPERATOR FOUND IN THE DRIVE. ONLY NEEDED IF THE ORIGINAL KEYPAD IS LOST OR DAMAGED. FEATURES INCLUDE: LCD KEYPAD DISPLAY, 5 LINES X 16 CHARACTERS, BACKLIT, 7 LANGUAGES, COPY FUNCTION. MOUNTS TO RJ-45 KEYPAD PORT
UL RATED REMOTE OUTDOOR OPERATOR/MOUNTING KIT PROVIDES ALL YOU WILL NEED TO REMOTELY MOUNT AN IQPUMP1000 DIGITAL OPERATOR TO THE DOOR/WALL OF A SEPARATELY PRICED, OVERSIZED UL TYPE 1, 3R, 4, 4X OR 12 ENCLOSURE (IPX6 ENVIRONMENT). THIS KIT INCLUDES: ONE JVOP-183R DIGITAL OPERATOR PROVIDING RTC, HOA, AND OUTDOOR RATED LCD DISPLAY, A FACEPLATE BEZEL WITH DIGITAL OPERATOR BRACKETS AND MEMBRANE TO COVER THE OPERATOR CUTOUT IN THE ENCLOSURE DOOR, A 3-FOOT CABLE, A 10-FOOT CABLE, AND A 1:1 TEMPLATE FOR CUTTING THE NECESSARY CUTOUTS IN THE ENCLOSURE. MOUNTING HARDWARE IS INCLUDED. KEYPAD CAN BE REMOVED AFTER KIT INSTALLATION. CONNECTS TO RJ-45 PORT AND MOUNTS TO ENCLOSURE WALL.
UL RATED REMOTE OUTDOOR OPERATOR/MOUNTING KIT PROVIDES ALL YOU WILL NEED TO REMOTELY MOUNT AN IQPUMP1000 DIGITAL OPERATOR TO THE DOOR/WALL OF A SEPARATELY PRICED, OVERSIZED UL TYPE 1, 3R, 4, 4X OR 12 ENCLOSURE (IPX6 ENVIRONMENT). THIS KIT INCLUDES: ONE JVOP-183R DIGITAL OPERATOR PROVIDING RTC, HOA, AND OUTDOOR RATED LCD DISPLAY, A FACEPLATE BEZEL WITH DIGITAL OPERATOR BRACKETS AND MEMBRANE TO COVER THE OPERATOR CUTOUT IN THE ENCLOSURE DOOR, A 3-FOOT CABLE, A 10-FOOT CABLE, AND A 1:1 TEMPLATE FOR CUTTING THE NECESSARY CUTOUTS IN THE ENCLOSURE. MOUNTING HARDWARE IS INCLUDED. KEYPAD CAN BE REMOVED AFTER KIT INSTALLATION. CONNECTS TO RJ-45 PORT AND MOUNTS TO ENCLOSURE WALL.
OPERATOR KITS, NEMA TYPE 3R/4X USED TO EXTEND AN LCD OR LED DIGITAL REMOTE OPERATOR TO THE WALL OF A SEPARATELY PRICED, OVERSIZED UL TYPE 3R, 4, 4X OR 12 ENCLOSURE (IPX6 ENVIRONMENT). PRICE INCLUDES A FACEPLATE BEZEL WITH DIGITAL OPERATOR CUTOUT IN THE ENCLOSURE DOOR, A 3 FOOT CABLE, A 10 FOOT CABLE, AND A 1:1 TEMPLATE FOR CUTTING THE NECESSARY CUTOUTS IN THE ENCLOSURE. KEYPAD CAN BE REMOVED AFTER KI INSTALLATION. DESIGNED FOR USE WITH THE LCD OPERATOR JVOP-183 OR THE LCD OPERATOR JVOP-183R, SOLD SEPERATELY. CONNECTS TO RJ-45 PORT AND MOUNTS TO ENCOLSURE WALL.
OPERATOR KITS, NEMA TYPE 3R/4X USED TO EXTEND AN LCD OR LED DIGITAL REMOTE OPERATOR TO THE WALL OF A SEPARATELY PRICED, OVERSIZED UL TYPE 3R, 4, 4X OR 12 ENCLOSURE (IPX6 ENVIRONMENT). PRICE INCLUDES A FACEPLATE BEZEL WITH DIGITAL OPERATOR CUTOUT IN THE ENCLOSURE DOOR, A 3 FOOT CABLE, A 10 FOOT CABLE, AND A 1:1 TEMPLATE FOR CUTTING THE NECESSARY CUTOUTS IN THE ENCLOSURE. KEYPAD CAN BE REMOVED AFTER KI INSTALLATION. DESIGNED FOR USE WITH THE LCD OPERATOR JVOP-183 OR THE LCD OPERATOR JVOP-183R, SOLD SEPERATELY. CONNECTS TO RJ-45 PORT AND MOUNTS TO ENCOLSURE WALL.
PC INTERFACE CABLE THIS 6-FOOT CABLE INTERCONNECTS THE DRIVE KEYPAD PORT TO THE 9-PIN COMMUNICATION PORT ON A PC. THIS CABLE IS USED IN CONJUNCTION WITH DRIVE WIZARD INDUSTRIAL SOFTWARE.
OPERATOR CABLE, REMOTE. THESE CABLES ARE USED TO CONNECT THE REMOTE LCD DIGITAL OPERATOR (JVOP-183). THEY ARE AVAILABLE IN ONE OR THREE METER LENGTHS
OPERATOR CABLE, REMOTE. THESE CABLES ARE USED TO CONNECT THE REMOTE LCD DIGITAL OPERATOR (JVOP-183). THEY ARE AVAILABLE IN ONE OR THREE METER LENGTHS
USB INTERFACE CABLE THIS 10-FOOT MALE USB-A TO MALE USB-B CABLE PROVIDES A USB-TO-USB CONNECTION FROM PC TO THE DRIVE
FLASH WRITE CABLE THIS 6-FOOT CABLE CONNECTS A PC'S 9-PIN SERIAL PORT TO THE DRIVE'S KEYPAD PORT FOR UPDATING THE DRIVE'S FIRMWARE, FLASHING WITH CUSTOM FIRMWARE, OR UPDATING A NETWORK COMMUNICATION OPTION BOARD. IT IS USED WITH THE FLASH TOOL FEATURE OF THE DRIVE WIZARD INDUSTRIAL SOFTWARE.
Red beacon only b
Dry contact for alarm / overload etc 1 per pump
Horn only/no visual ( must select "O" for alarm package)
Alarm flasher
Manual alarm reset
Manual alarm reset
Redundant off (select Option 4D if floats included)
Red Redundant off indicator & alarm (must select Option 4A also)
Redundant off float (must select Option 4A) (select 17 option)
Thermal cutout/heat sensor auto reset (for pumps with thermal switch leads)
Seal failure cuircuit & red indicator (2 wire)
Seal failure cuircuit & red indicator (2 wire)
Auxiliary alarm contact, form C (included as standard)
Auxiliary alarm contact, form C
DETECTION DE FAULT OVERLOAD
Thermal switch****Add with the Motor over heating for the submersible 3PH ***Price for Duplex system
Elasped time meter
Event (cycle) counter
Pump overload specify amperage after number 9 followed by letter "A" Example 912=12 amp pump 0-25 FLA
Pump overload specify amperage after number 9 followed by letter "A" Example 912=12 amp pump 25-30 FLA
Clear inner swing-out door w/dead front ( lights and switches mounted on inner door) * panel ordered with option cannot be returned
Lockable latch NEMA 1
Lightning arrestor (select pump circuit breaker) (for 122 panel)
Lightning arrestor (select pump circuit breaker) (for 322 panel)
Anti condensation heater
Anti condensation heater
NEMA 1 alarm panel
NEMA 4X alarm panel
NEMA 4X alarm panel ( select option 6A)
Main disconnect (rotary style, mounted through door, non-fused) ( must select circuit breaker) 0-20 FLA total both pumps
Main disconnect (rotary style, mounted through door, non-fused) 0-10 FLA total both pumps
Main disconnect (rotary style, mounted through door, non-fused) ( must select circuit breaker) 20-60 FLA total both pumps
Main disconnect (rotary style, mounted through door, non-fused) 10-20 FLA total both pumps
Main disconnect (rotary style, mounted through door, non-fused) 20-50 FLA total both pumps
10' cord in lieu of 20' (per float)
15' cord in lieu of 20' (per float)
30' cord in lieu of 20' (per float)
40' cord in lieu of 20' (per float)
SignalMaster/pipe clamp (per float)
SignalMaster/externally weighted (per float)
Sensor float / internally weighted (per float)
Sensor float / externally weighted (per float)
Sensor float / Mini pipe clamp (per float)
Sensor float / Mini externally weighted (per float)
Sensor float / pipe clamp (per float)
Lead lag selector switch
Fourth float to separate alarm function from lag
TOA (Test/Off/Automatic) switches and pump run lights through door mounted
HOA (THand/Off/Automatic) switches and pump run lights through door mounted
Door mounted pump run indicator
Provision for connection of solenoid
Remote start/stop signal
24 Volt start signal
Lamp test push button
Push to test push button
Disable lag pump on external (Booster)
On delay timer (use to avoid nuisance tr
Off delay timer
Two positions selector
Pressure switch NEMA 4
High pressure alarm only
High pressure alarm and stop pump
Low pressure alarm
Low pressure alarme and stop pump
High Temperature alarm
High Temperature alarm and stop pump
Low Temperature alarm
Low Temperature alarm and stop pump
Connection for Aquastat
Indication only of pump failure to start
High high pressure alarm
High high pressure alarm and stop pump
Low Low pressure alarm
Low low pressure alarm and stop pump
Low low temperature alarm
Low low temperature alarm and stop pump
High high temperature alarm
High high temperature alarm and stop pum
Float failure alarm for 3 or 4 floats
Addition of bi-pass timer of fault (flow
pump lead selector switch
Ammeter - CT operated - for per pump
Voltmeter for system voltage - Direct re
Pump stop indication per pump
Alarm no flow (inclus bi-pass timer on s
Fault with latching relay and reset butt
Remote signal for low of power
Start lag pump on high level
Current detection relay per pump (to con
Current detection relay to start S-B pum
Loss of phase and phase reversal detecti
Timer for minimum run
Timer for maximum run
General alarm indication with relay
Lag pump demand indication light
Lightning arrestor
Extra for flashing function on pilot lig
Ground fault indication with pilot light
Receptacle - 120 V - 15 amps
motor circuit interruptor instead of fus
Motor circuit interrupter (instead of fu
Moulded case circuit protector (replaces
Repeat cycle timer
Telephone dialler with battery back-up
Push button for misc. sequence (describe
Alarm high level
Start lag pump on high level
Pump start counter
Line or load reactor for above
Stop pump on low level in manual mode
Horn
micro-controller describe sequence
Blown fuse indication for single phase s
Incomming power from two sources in one
Incomming power from two sources in two
Circuit breaker protection for primary a
Circuit breaker protection for secondary
Soft start for reduced voltage starting
Forced ventilation (Louvre-Fan-Thermosta
Reversing starter
Through the door overload reset buttons
Tank alert
Flow switch CPS start on low pressure
Pressure switch additional
U/L approval of panel
Provision for padlock on enclosure
glass protection for Optrel for MEO
LENS INSIDE CLEAR for MEO
Programable Plc Microprocessor processor
Alarm relay for remote indication
Communication protocol
EMERGENCY POWER
208 volt surcharge 1x for simplex 2x for duplex 3x for triplex
High liquid alarm with dry contact Glycol
Biedirectionel option qty 1 per pump
6 entré
3 Relay OUT
Intrinsically OPTION FOR EXPLOSION PROFF
Moisture sensor for panel
Surge protection
Ultrasonic option for conventional panel
STEAM PUMP FORBES